Features:
- Ultra high brightness red/green/blue LED
display that can be panel mounted or attached to a tach with a supplied
bracket. The LED display features full spectrum color capability including
white with user selected colors for each function and automatic dimming under
low light conditions.
- Launch and multi-stage shift light
capability. A launch RPM and up to five shift RPM levels can be defined to
support up to six gear transmissions. " Gear detection is based on vehicle
speed (if a vehicle speed sensor is available) or RPM drop during shift.
Vehicle speed based gear detection allows use in applications other than drag
racing as it allows correct gear sensing after downshifts.
- Launch detection is based on vehicle speed
(if a vehicle speed sensor is available) or a signal from a line lock
solenoid.
- Two independent programmable alarm
functions for analog inputs. Additional programmable alarm and general purpose
control output functions are described in the software
section.
- Flexible RPM input compatible with high
voltage coil drive (vehicles with coil packs or distributor ignition),
standard 12 volt tach signal, or low level logic drive (newer vehicles with
coil-on-plug).
- Built-in data logging. Ideal as basic
vehicle data logger during dyno tuning or on the track. Logs data whenever
system is armed. Stores last 5 minutes of data at 10
samples/second.
- Data logged includes throttle position,
RPM, vehicle speed, status of all inputs and outputs, and two 0-5 volt analog
inputs.
- 0-5 Volt analog inputs are compatible with
Daytona Sensors single or dual channel WEGO III systems for logging wide-band
air/fuel ratio data.
- General purpose input/output (GPIO)
terminal. The output can be used to trigger a nitrous system or activate high
gear retard.
- Heavy duty industrial grade clamping
terminal blocks allow easy and reliable hookup without soldering or
crimping.
- Compact size: 3.3"L x 2.4"W x 1.1"H (not
including mounting feet and terminal
block).
- USB interface to laptop PC. Powerful
Windows software for programming controller and downloading logged
data.
Installation
Instructions
PC Link
Shift Software:
PC Link
software runs under Microsoft Windows 98/ME/XP/Vista. PC Link allows the user to
program all functions of the SL-1 system. Minimum PC requirement is a 300 MHz
Pentium with super VGA display (SVGA with 1024 x 768 pixel resolution). The SL-1 connects to the PC by means of al USB
interface. A USB cable is supplied with the unit. The PC must have a free USB
port. Download the PC Link Shift Soffware for
free!
- Used to establish controller scale factors, general
setup parameters, multi-stage shift and launch light parameters, and alarm
parameters.
- Two independent programmable alarm functions for
analog inputs. Possible uses include monitoring air/fuel ratio (AFR) values
from wide-band system or boost pressure. Scale factors are predefined for
common 1, 2, and 3 bar MAP sensors and wide-band AFR systems such as the
Daytona Sensors WEGO series.
- Programmable vehicle speed alarm. Possible uses
include over-speed alarm or green light function for pit row speed
limit.
- General purpose output function. Programmable for
use as a control output for functions such as nitrous activation or high gear
ignition retard.
- You can download and upload to the module, open and
save files to disk, and print setup values. Includes comprehensive on-line
help system.
Basic
Shift Light Setup
Shift
Light Color Choices
Multi-Stage
Shift Light Setup with RPM Drop Gear Detection
Multi-Stage Shift Light Setup with VSS (Speed) Based Gear
Detection
General
Purpose Output (GPO) Parameters Dialog Box
User
Defined Alarms Dialog Box
VSS
(Speed) Alarm Dialog Box
Shift Log
Software
The SL-1 features
comprehensive data logging capability. During initial system checkout and dyno
testing, you can display real time engine data on an instrument panel type
screen. The SL-1 also stores data for the last 4-1/2 minutes of operation. You
can download and display this data on a chart recorder type screen. Data is
available for all inputs and output functions. The Shift Log software has the
same PC requirements as described above for the PC Link software. For more
detailed information, we suggest that you download the Shift Log software and
instructions. The software download includes a sample file with actual
data. Download the Shift Log Software
for free!
- Two modes: real time display and chart
display of data downloaded from the module.
- Real time display of system and engine data
on an instrument panel layout with round tach and speedometer gauges and bar
graph gauges for most other parameters. Used for initial system setup and to
monitor operation during dyno tuning.
- Chart display for downloaded data allows
you to monitor vehicle operation on the track. You have a range of
capabilities for analyzing the displayed data.
- You can download data from the module, open
and save files to disk, and print chart graphics. Includes comprehensive
on-line help system
Shift
Log Real Time Engine Data Display
Shift
Log Chart Display
